HC1 miniBOOSTER

HC1 versions: 9 different intensification factors

PIN: 20–207 bar (inlet pressure)

PH: 800 bar maximum (outlet pressure)

PRETURN: As low as possible (return pressure to tank)

POUTLET: PH = (PIN – PReturn) i (intensification)

Mounting: Inline tube

Accessories: Pilot-operated dump valve available

A model = no dump valve
B model = with dump valve
G model = direct proportionally controlled

 

Description

The HC1 is the most compact miniBOOSTER unit weighing only 0.7 kg. It is ideal for use in applications where it is desirable to mount the unit on or in a tool, power pack, or other device. 

The HC1 raises supplied pressure to a higher outlet pressure and automatically compensates for consumption of oil to maintain the high pressure. Adjustment of the outlet pressure is carried out by varying the supplied pressure.

 Intensification factor
 i 

 Max. outlet flow
 l/min 

 Max. inlet flow
 l/min 

 1.2 

 0.5 

 8.0 

 1.5 

 0.5 

 8.0 

 2.0 

 0.5 

 8.0 

 2.8 

 0.5 

 8.0 

 3.3 

 0.5 

 8.0 

 4.0 

 0.4 

 8.0 

 4.8 

 0.4 

 8.0 

 6.2 

 0.3 

 8.0 

 7.5 

 0.3 

8.0

Dimensions

Functions

The basic operation is illustrated in the function diagram. Oil is fed through the directional valve CV to the IN port, flowing freely through the check valves KV1, KV2 and DV to the high-pressure side H. In this condition maximum flow through the booster is achieved, giving a fast-forward function.

When pump pressure is reached on the high-pressure side H, valves KV1, KV2 and DV will close. The end pressure will be achieved by the oscillating pump unit OP. The unit will automatically stall when end pressure on the high-pressure side H is reached. If a pressure drop on the high-pressure side exists due to consumption or leakage, the OP valve will automatically operate to maintain the end pressure.


Function diagram

Connection types

Connection

IN / R

H

1

1/8" BSPP

1/4" BSPP

2

3/8-24 UNF

9/16-18 UNF

Max. tightening torque BSPP

IN / R

H

1/8" BSPP

1/4" BSPP

with steel washer

2.0 da/Nm

4.0 da/Nm

with aluminium washer

1.0 da/Nm

with cutting edge

2.0 da/Nm

4.0 da/Nm

Max. tightening torque UNF

IN / R

H

3/8-24" UNF

  9/16-18" UNF

  with o-ring

1.5 da/Nm

3.5 da/Nm

Fluids and materials

Please see: General specifications

 

Ordering an HC1

Ordering example of an HC1 with i = 3.3, DV incorporated and BSPP connections: HC1 - 3.3 - B - 1

Model

Intensification, i

Dump valve

Connections

HC1


 your selection...


 your selection...


 your selection...

see flow rate table

A = (no) / A model

1

B = (yes) / B model

2

G = (proportional) / G model

 

Subscribe to our Newsletter





Get our quarterly newsletter in your inbox. Your name and email address are safe with us! We will not share your contact information with anyone outside the miniBOOSTER Company.

Iso 9001

miniBOOSTER Hydraulics A/S

Fynsgade 3

DK - 6400 Sønderborg

Denmark