HC1-9 versions: 7 different intensification factors
PIN: 20–207 bar (inlet pressure)
PH: 500 bar maximum (outlet pressure)
PRETURN: As low as possible (return pressure to tank)
POUTLET: PH = (PIN – PReturn) i (intensification)
Accessories: Pilot-operated dump valve available
HC1-9 is a compact hydraulic cartridge miniBOOSTER unit weighing only 0.75 kg. It is ideal for use in applications where it is desirable to mount the unit on or in a manifold, cylinder, or other device.
The HC1-9 raises supplied pressure to a higher outlet pressure, maximum 500 bar, and automatically compensates for consumption of oil to maintain the high pressure. Adjustment of the outlet pressure is carried out by varying the supplied pressure.
Max. outlet flow
Max. inlet flow
The basic operation is illustrated in the function diagram. Oil is fed through the directional valve CV to the IN port, flowing freely through the check valves KV1, KV2 and DV to the high-pressure side H. In this condition maximum flow through the booster is achieved, giving a fast-forward function.
When pump pressure is reached on the high-pressure side H, valves KV1, KV2 and DV will close. The end pressure will be achieved by the oscillating pump unit OP. The unit will automatically stall when end pressure on the high-pressure side H is reached. If a pressure drop on the high-pressure side exists due to consumption or leakage, the OP valve will automatically operate to maintain the end pressure.
Please see: General specifications
Ordering example of an HC1-9 with i = 3.3, DV incorporated and BSPP connections: HC1 - 3.3 - B - 9
see flow rate table
A = (no) / A model
B = (yes) / B model
G = (proportional) / G model
DK - 6400 Sønderborg