The M-HC6 is a complete, ready-to-install, high-flow and high-pressure intensifier system. The system is based on the miniBOOSTER HC6 intensifier and includes integral high-flow bypass and isolation valves.
PIN = 20–300 bar
PH = 500 bar
Q = 100 L/min
Weight: 23 kg
The system is ideal for mobile attachments to take full advantage of the pump capacity for fast-forward movement of the hydraulic cylinder(s) and to boost pressure, when needed to achieve intensified (crushing/clamping) pressures. Typical applications: Mobile attachments (cutters - crushers - shears) injection molding machines and hydraulic presses.
• Extra tough
• System is shipped completely assembled and factory-tested, ready for installation
• Provides high flow and high pressure
• Available with several intensification ratios
• Optional and multiple connection arrangements
The M-HC6 intensifier system can be tailor-made to match your application with the following options.
A variant designed to be flanged directly to the high-pressure cylinder. Supplied with 2 extra Pump P1 and Tank T1 ports (3/8” BSPPP ports)
A variant designed to be flanged directly to the high-pressure cylinder. Supplied with 2 extra Pump P1 and Tank T1 ports (1/2” BSPPP ports)
A variant with a 1/2” BSPPP high-pressure port for tube or hose mounting
A variant with a 1/2” BSPPP high-pressure port for tube or hose mounting and a pressure relief valve on the high-pressure side, eliminating critical pressure peaks from the high-pressure cylinder
Please send us your application needs in order to receive a proposal.
P1, T1 3/8” BSPP
P1, T1 1/2” BSPP
Tube 1/2” BSPP
Tube 1/2” BSPP
Relief valve on HP side
An intensifier system M-HC6 for 500 bar 100 L/min with 1/2” BSPP thread connection on high-pressure side, for tube mounting. Mounted with a HC6-2.5-A-1:
M-HC6-003 – 2.5 – A – 1
DK - 6400 Sønderborg