Print friendly version

• Description
• Flow Rates
• Dimensions
• Functions
• Fluids and materials
• Ordering

The HC3 - C miniBOOSTER

HC3 versions: 11 different intensification factors PIN: 20 – 200 bar (inlet pressure) PH: 500 bar maximum (outlet pressure) PRETURN: As low as possible (Return pressure to tank) Intensification ratios: PH = (PIN – PReturn) i (Intensification) Mounting: NG6 (D03) stacking manifold system Accessories: Pilot operated dump valve available A model = no dump valve B model = with dump valve G model = direct proportionally controlled

  Description of the HC3 - C miniBOOSTER hydraulic intensifier

The HC3 – C, a variant of the HC3, for applications with larger flow rates, providing a fast response with build in by-pass up to 50 l/min. It is a compact unit weighing only 4.0 kg, designed for use in NG6 (D03) stacking manifold systems. Maximum outlet pressure is 350 bar in standard versions. An adjustment of the outlet pressure is carried out by varying the supplied pressure.

  Flow Rates

  Dimensions

  Functions

When pump pressure is reached on the A port, check valve (b) will close and the oil will flow via the Orifice (a) to the oscillating pump unit OP. The end pressure will be achieved by the oscillating pump OP. The unit will automatically stall when end pressure on high-pressure side is reached. If there is a pressure drop on the high- pressure side due to consumption or leakage, the OP valve will automatically operate to maintain the end pressure.

Function Diagram

Please see General Specifications.

  Ordering a HC3 - C

Ordering example of a HC3 - C with i = 4.0,
DV incorporated: HC3 - 4.0 - B - C