Print friendly version

1. Description
2. Flow rates
3. Dimensions
4. Functions
5. Connection types
6. Max tightening torque BSP
7. Fluids and materials
8. Ordering number

The HC6D miniBOOSTER

Up to 2.5 times the volume HC6D versions: 9 different intensification factors PIN: 20 – 200 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (Return pressure to tank) Intensification ratios: PH = (PIN – PReturn) i (Intensification) Mounting: Inline tube Accessories: Pilot operated dump valve available A model = no dump valve B model = with dump valve G model = direct proportionally controlled

  Description of the HC6D miniBOOSTER hydraulic intensifier

The HC6D is a high flow dual acting unit which is capable of up to 56.0 l/min flow on the high pressure end. Like other miniBOOSTER models, the HC6D raises supplied pressure to a higher outlet pressure and automatically compensates for consumption of oil to maintain the high pressure. Adjustment of the outlet pressure is carried out by varying the supplied pressure. Relative to its flow capability, the HC6D is a compact unit weighting 20 kg.

  Flow Rates

  Dimensions

  Functions

The basic operation is illustrated in the function diagram. Oil is fed through the directional valve CV to the IN port, flowing freely through the check valves 2x KV1, 2x KV2 and DV to the high pressure side H. In this condition maximum flow through the booster is achieved giving a fast forward function.

When pump pressure is reached on the high pressure side H, valves KV1, KV2 and DV will close. The end pressure will be achieved by the oscillating pump units OP1 and OP2 by turns. The unit will automatically stall when end pressure on high pressure side H is reached. If there is a pressure drop on the high pressure side due to consumption or leakage, the OP1 and OP2 units will automatically operate to maintain the end pressure. It is possible to change the high pressure connection H to the opposite end of the booster.

Function Diagram

  Connection types

  Max. tightening torque BSP

  Fluids and materials

Please see General Specifications.

  Ordering a HC6D

Ordering example of a HC6D with i = 4.0,
DV incorporated and BSP connections: HC6D - 4.0 - B - 1