 |
|
 Print friendly version
|
|
|
|
|
- Description
- Dimensions
- Functions
- Ordering
|
|
Valve Housing CV4 – with Filter & PRV
|
|
|
The miniBOOSTER Valve Housing is used for mounting various accessory components directly to the miniBOOSTER.
This saves space and reduces the cost of using stand alone components for these functions.
The valve housing and components selected will be factory mounted, tested and sized based on the model of miniBOOSTER selected. Housing material, aluminum.
|
 Description
The CV4 incorporates a 10 micron filter element to protect the miniBOOSTER, a Pressure Reducing Valve (PRV) to control inlet pressure to the miniBOOSTER and an optinal orifice to reduce inlet flow to the maximum allowed for the intensification ratio selected. Check valves protect the filter from backflow during the dump cycle.
Dimensions (Valve Housing CV4 for HC2, HC7 & HC8)
Dimensions (Valve Housing CV4 for HC4)
Functions
Function Diagram
1. Orifice(s) (Optional)
2. 10 micron Filter Element
3. Check valve
4. PRV Cartridge
5. Check valve
6. Housing
7. HC2, HC4, HC7 or HC8
Ordering a Valve Housing CV4 for HC2
Example of ordering a complete unit:
1 off Valve housing HC2 – CV4 – 1
1 off Pressure reducing valve CP230-4B0AC0, cavity: C10-3
1 off miniBOOSTER HC2 – 4.0 – B – 1
Spare Part Filter Element FIL-KIT-10
|
|
| your selection... |
|
CV4 |
|
your selection... |
|
|
|
|
|
| For HC2, HC7 and HC8 |
|
|
|
1 = 1/4" BSP |
|
2 = 7/16 - 20 UNF |
|
|
| HC4 |
1 = 3/8" BSP |
|
2 = 9/16 - 18 UNF |
|
|
|
|
|
